Negotiable
The date of payment from buyers deliver within days
Shandong
Long-term effective
2020-03-13 21:19
305
Company Profile
Baoshida International Holding Group Co., Ltd.By certification [File Integrity]
Contact:baoshida(Mr.)
Email:
Telephone:
Phone:
Area:Shandong
Address:Shandong
Website:http://www.baoshida-group.com/ http://baoshida.hyj555.com/
XLPE Insulated power Cable
PVC Insulated Power Cable with Rated Voltage up to 0.6/lkV
I. Application
It is suitable to use for transmission and distribution electric circuit in power system with rated voltage up to 1kV.
II.Type and Designation
Type | Designation |
Standard |
|
Copper core |
Aluminum core |
||
VV |
VLV |
Coppe(aluminum) PVC insulation PVC jacketing power cable |
IEC60502-1 |
VV22 |
VLV22 |
Copper (aluminum) steel strip armoring PVC Insulating and jacketing power cable |
|
VV32 |
VLV32 |
Copper (aluminum) thin steel wire armoring PVC Insulating and jacketing power cable |
|
VV42 |
VLV42 |
Copper (aluminum) thick steel wire armoring |
Note: the products also contain flame-retardant type and fire-resistant type (except for aluminum), and their properties are in accordance with the flame-retardant and fire-resistant requirements in GB/T18380 and GB/T19216 respectively.
III. Specification
Type | Rated voltage kV |
Number of core |
Nominal cross-section |
|
Copper core |
Aluminum core |
|||
VV |
VLV |
0.6/1 |
1 |
1.5〜1000 2.5〜300 |
VV |
VLV |
2 |
1.5-185 |
|
VV |
VLV |
3 |
1.5-300 |
|
VV、 VV22、 |
VLV、 VLV22、 |
4/3+1; |
4 〜300 |
IV. Structural figure
V. Technical parameter
1 . Conductor DC resistance shall meet the stipulation in GB/T3956.
2 . Finished cable shall pass the AC voltage (50Hz、 5min、 3500v) test without breakdown. Water-immersion voltage resistant test is for the single core cable with no armor
3.Insulation resistance
4 . Flame-retardant test
Finished cable shall meet the flame-retardant property test requirement stipulated in IE60332-3 and GB/T18380.3.
5 . Fire-resistance test
Finished cable shall meet the fire resistant test requirements stipulate d in IEC60332-21 and GB/T19216.21.
VI. Feature
Five-core power cable is suitable to use in three-phase five-wire transmission and distribution power system. Separating the neutral wire from the ground wire thus is available for the stable operation of the system and safety of the operator. Moreover, s] nee the five-core power cable is designed in a special tile form, the cable has many features such as a stable structure, lightweight, small outer diameter and so on.
http://www.baoshida-group.com/