Negotiable
The date of payment from buyers deliver within days
Zhejiang
Long-term effective
2021-06-16 11:05
160
Company Profile
Taizhou Tengnuo Mould And Plastic Co., LtdBy certification [File Integrity]
Contact:tengnuomosu(Mr.)
Email:
Telephone:
Phone:
Area:Zhejiang
Address:Zhejiang
Website:http://www.tntmoulds.com/ http://tengnuomosu.hyj555.com/
We only need less than 3 weeks to complete the modeling data of the entire project, during which the company's professional technical team will repeatedly demonstrate based on decades of experience
The mold will be finished by high-speed CNC machine (spindle 16000 / m) (tolerance ± 0.015) in our factory , mold lock bar , part surface , part line , slider gap , gap of ejector block must be processed in one time. Because of these precision tool machine , the fitter only need clean some burr and directly to assemble slider block and ejector block together . It will improve the accuracy of the mold , but also shorten the time to assemble .
After finishing processing, the detection accuracy of the testing center on the mold. Failed to restart high-speed CNC machining.
Usually , we need 2 days to check and adjust , all parts like pressure plate , ware plate , slider block , Bi -injection sealing surface can match well , the rate of red color above 90%.
Clean up the corresponding accessories, and install the oil cylinder to perform the machine action test, and finally test the production
The mold flow engineer and the craftsman at the production site will check details based on the previous design date, including product size, appearance, assembly, and check whether it is within delivery time .
When the sample is sent to the last customer for inspecting , the company's mold is disassembled and inspected by ourselves . Each part of the mold needs to be taken out , and check the water pressure, flow test, the lettering code of each part, the hardness of the relevant part, the label, and size of lifting ring , The lifting balance of the mold, check the consistency of the mold and design data, the mold must be re-inspected before it can be shipped to our customers .
In order to prevent the mold from rusting during long time shipping, each mold is vacuum-packed and then fixed in a wooden box.
Part name |
Upper side plate body of auto |
client |
Lincoln |
Product material |
ABS |
Mold size |
1520X1080X980mm |
Cavity number |
1+1 |
Mold steel type |
Cavity 1.2738 Core 718H |
Hot runner/brand |
YUDO |
Production time |
45s |
On shot cycle time |
45s |
Injection molding machine brand |
Haitian 1000T |
Hydraulic cylinder brand |
HPS |
http://www.tntmoulds.com/